360W Mechanical Control Ultrasonic Cleaning Equipment With 28KHz High-Frequency Transducers For Deep Cleaning Of Electronic Components / Mechanical Gears.
Redefining Industrial-Grade Cleaning Standards
Utilizes 28kHz±0.5% precise frequency control technology to generate over 3 million cavitation bubbles per second, with an impact force of up to 50MPa. This effectively peels off stubborn dirt ≥5μm on metal surfaces. The bottom arc-shaped flow guide groove design creates a 360° circulating eddy current in the cleaning solution, eliminating the cleaning blind spots of traditional flat tanks. For example, in cleaning automotive engine fuel injectors, it can remove carbon deposits in 0.2mm internal pores, improving cleanliness by 8 times compared to manual brushing, meeting the VDA 19.1 level of ISO 16232-10 standards.
Both the machine body and cleaning tank are made of 3mm thick SUS304 stainless steel (compliant with ASTM A240 standards), formed through 12 bending and welding processes. The acid and alkali corrosion resistance is 40% higher than ordinary stainless steel. The bottom is equipped with anti-vibration and anti-slip foot pads (Shore hardness 90A), combined with a 4mm rubber vibration-isolation layer, ensuring operating noise ≤55dB and vibration amplitude controlled within 0.3mm. It is suitable for continuous operation in precision laboratories and high-frequency industrial scenarios (e.g., 24-hour uninterrupted cleaning of bearing workpieces).
Supports continuous power adjustment from 50-1500W (step precision 10W) to match different cleaning loads:
- Low-load mode (50-300W): For jewelry cleaning, pulsed power output (10ms interval) avoids damage to precious metal surface coatings, with a gloss recovery rate of 98%;
- High-load mode (500-1500W): For degreasing mechanical parts, combined with 60°C constant temperature heating (temperature control precision ±2°C), the solubility of mineral oil is tripled, and the daily processing capacity of a single tank can exceed 800 pieces.
| Mechanical Series | | | | | | | |
| Model | Capacity | Ultrasonic power | Heating power | Cleaning tank size | Overall dimensions of the machine | Gross Weight | Large box size |
| L | W | W | (LⅹwⅹH)mm | (LⅹwⅹH)mm | KG | (LⅹwⅹH)mm |
| JPS-08 | 1.3L | 60 | 100 | 150×140×65 | 180×170×140 | 2.5 | 526×524×308(4Table) |
| JPS-10 | 2L | 80 | 100 | 150x140x100 | 180x170x180 | 3.0 | 526×524×338(4Table) |
| JPS-20 | 3L | 120 | 100 | 240x135x100 | 270x170x210 | 4.0 | 410×355×345(2Table) |
| JPS-30 | 6L | 180 | 300 | 300x150x150 | 330x180x270 | 6.0 | 555×435×390(2Table) |
| JPS-40 | 10L | 240 | 300 | 300x240x150 | 330x270x270 | 8.0 | 735×435×380(2Table) |
| JPS-50 | 14L | 300 | 300 | 300×240×200 | 330×270×320 | 9.0 | 420×360×420(1Table) |
| JPS-60 | 15L | 360 | 300 | 330×300×150 | 360×330×270 | 10.0 | 450×420×370(1Table) |
| JPS-70 | 19L | 420 | 300 | 330×300×200 | 360×330×320 | 11.0 | 460×420×420(1Table) |
| JPS-80 | 22L | 480 | 600 | 500×300×150 | 550×330×270 | 13.0 | 625×420×370(1Table) |
| JPS-100 | 30L | 600 | 600 | 500×300×200 | 550×330×320 | 15.0 | 625×420×420(1Table) |
