Leakage Monitoring System: Equipped with differential pressure sensors (accuracy: 0.1Pa) to continuously monitor the sealing performance of components. In case of anomalies, the system automatically shuts down and triggers an alarm within ≤2 seconds.
Explosion-Proof Design: Tailored for scenarios involving the cleaning of residual rocket propellants, it features ATEX-certified explosion-proof motors and electrostatic grounding devices (resistance ≤2Ω), fully compliant with the explosion-proof requirements of GJB 918A-2004.

Technical Notes:

Signal Noise Reduction: Measured via IEEE 1149.1 boundary scan test.
Oxide Film Uniformity: Evaluated using SEM cross-section analysis per ASTM B487.
Shielding Effectiveness: Tested according to MIL-STD-461G RE102 method.
Manual precise control, adaptable to process debugging in multiple scenarios
1. Optimized human-machine interaction for quick mastery by beginners
- Knob - type parameter adjustment: Independently set ultrasonic power (stepless adjustment from 20% - 100%), cleaning time (1 - 60 minutes), and oscillation frequency (5 - 20 times/minute). Paired with an LED digital display screen (resolution 0.1W/1s), key parameters are clearly visible, reducing the debugging error rate by 70%.
- Ergonomic design: The operation panel is installed at a 30° inclination (at eye - level height). The cleaning tank has a depth of 400mm, suitable for both standing and sitting operations. The handle of the cleaning basket is wrapped with non - slip rubber, and the single - hand lifting weight is ≤5kg (for the 6L model), enabling female operators to easily load and unload workpieces.
1. Flexible load adaptation, from small to medium - sized workpieces
- Detachable fixtures: Standardly equipped with universal PTFE (polytetrafluoroethylene) brackets (temperature resistance: - 200°C - 250°C), compatible with workpieces with a diameter of 20 - 150mm and a weight ≤3kg (such as watch movements and optical lenses). Customized fixtures (such as support claws for thin - walled parts and separators for multi - hole parts) are available as options to ensure unobstructed cleaning of irregularly shaped parts.
- Multiple capacity specifications: Standard tank volumes of 6L, 10L, and 15L are provided (customization from 20L to 50L is supported). The 6L model is suitable for single - piece fine cleaning in laboratories, while the 15L model can process 10 automotive fuel injectors (diameter ≤50mm) simultaneously, meeting the requirements from small - batch sampling to small - and medium - scale production.

Inquiry Cart 0